69-Liter top-loading laboratory autoclave sterilizer that accommodates up to 3 stackable stainless-steel baskets for maximum high-capacity loads (includes 2 baskets).
Bulk / multiple unit discounts are available for this item; please inquire using the contact form for pricing.
Fast and compact lab autoclave sterilizer.
Small footprint and maximum capacity in the least amount of space. Fits any lab!
Rapid Cooling ActionTOMY SX-700 Lab Autoclave comes standard with a dual fan system, which reduces the cooling time by 42% compared to non-fan-equipped autoclaves. Thus, shortening overall operation time and reducing the possibility of burns.
Easy installationJust plug it in and add water! Whereas some lab autoclaves need plumbing or vacuum connections, Tomy Autoclaves are simple to install.
Intuitive operationBecause of a well-designed LED display, the TOMY SX-700 Lab Autoclave is easy to monitor. The foot-pedal assisted mechanical lid makes for easy opening. And wheels allow for effortless movement and storage.
5 Convenient Sterilization SettingsFirst, a Liquid Sterilizing Course which helps prevents boiling over. Second is the normal Sterilizing Cycle. Next the Sterilizing–Warming Course prevents coagulation, hardening, or freezing of culture media after the sterilization ends. Then the Heating–Warming Course, which is convenient for heating and dissolving culture media. Last, a Memory Recall setting, which allows you to repeat previous settings.
Space-SavingThe main body of the SX-700 autoclave is compact because of the vertical design. Vertical autoclaves are ideal for maintaining high capacities in a compact lab setting. In addition, installation space at the side of the autoclave is not required, as compared to autoclaves using a slide-open lid.
Designed to be reliable and simpleMade of high quality, durable materials. Because TOMY focuses on quality, we help create the best user experience possible, with minimal maintenance or downtime.
Chamber Capacity69 L
Max Temperature135 C
Max Operating Pressure0.25 MPa
Power SourceAC 207-253 V 13A
|Operating Temperature Range||Sterilizing||105 - 135°C （0.019 - 0.212 MPa）|
|Heating||45 - 104°C （0 - 0.015 MPa）|
|Warming||45 - 95°C|
|Maximum Operating Pressure||0.25 MPa|
|Display Range||0 - 0.4 MPa|
|Heat Source||3 kW electric heater|
|Safety Device||• Water level sensor • Current leakage breaker • Lid interlock • Over-heat prevention • Over-pressure prevention • Open temperature sensor detection • Safety valve|
|Display Range||Sterilizing||0:00 - 9:59, 0 - 99 hours, 0 - 999 min. (0:00 - 9:59, 10 - 99 hours changeable)|
|Warming||Variable: 0 - 99 hours|
|Effective Chamber Dimensions||φ360 x 675 mm|
|Chamber Capacity||Effective internal volume: 69 L, Internal volume: 79 L|
|Dimensions (mm)||470 (W) x 528 (D) x 1003 (H) mm (With protruding: 625 D)|
|Required Power Supply||AC 207-253 V 13A Requires NEMA6-15P type power plug|
|Power Consumption (calorific value)||3.0 kW (2580 cal/h)|
When operating the autoclave, observe the environmental conditions given below.
Ambient temperature: 10 to 35°C
Atmospheric pressure: 860 to 1060 hPa
Relative humidity: 30 to 85%
Maximum gradient: 2
|Accessories||Stainless baskets 2 (φ345 x 181 mm)|
|• Chamber bottom Plate (1) • Caster stoppers (4) • Operator's Manual (1) • Clear folder (for storing the operation manual) (1) • Screw (for attaching the clear folder) (1) • Warranty card (1) • Customer card (1) • Inspection Sheet (1)|
You may also like…
Zero Installation Costs
Lifetime Customer Support
1 Year Warranty
What to Expect with
It’s easy to get your new autoclave set up.
Please ensure the following prior to receiving:
Measure the floor space for your new unit to make sure that your autoclave will fit perfectly.
Verify your existing electrical connections.
Your autoclave requires 110V-grounded, 3-prong electrical outlet.
Empty & unplug your old unit.